ASA datasheet(10/16 Pages) POLYMAKER

10 / 16 page

Jam-Free™ technology improves the heat stability

of Polymaker’s PLA filaments with softening

temperatures over 140 °C. As a result, Polymaker’s

PLA filaments show minimal softening in the “cold

end” and can melt rapidly once entering the heating

zone, leading to excellent printing quality with zero

risk of nozzle jams.

Warp-Free™ technology enables the production

of Nylon-based filaments that can be 3D printed

with excellent dimensional stability and near-zero

warpage. This is achieved by the fine control of

micro-structure and crystallization behavior of

Nylon, which enables the material to fully release the

internal stress before solidification.

Ash-Free™ technology allows Polymaker’s filament

which has been designed for investment casting

to burn off cleanly without any residue, enabling

defect-free metal parts. 3D printing has been used

to produce investment casting patterns as it cuts

down both the cost and lead time for small-volume

production runs.

JAM-FREE™

WARP-FREE™

ASH-FREE™

Technologies

Without Ash-FreeTM

Ash content: 0.5%

With Ash-FreeTM

Ash content: 0.003%

Regular Nylon

With Warp-FreeTM

Regular PLA

With Jam-FreeTM

ASA Datasheet(PDF) 10 Page - Polymaker Industrial