PI49FCT3805DSE datasheet(2/8 Pages) PERICOM

2 / 8 page

PS8492C

09/08/04

PI49FCT3805D/E

3.3V, 2 x 1:5 CMOS Clock Driver

Storage Temperature ................................................................. –65°C to +150°C

Ambient Temperature with Power Applied ................................ –40°C to +85°C

Input Voltage to GND Potential (Inputs & VCC Only) .................. –0.5V to 5.5V

Output Voltage to GND Potential (Outputs & I/O Only)...–0.5V to +VCC +0.5V

VCC Input Voltage........................................................................ –0.5V to +4.6V

Note:

Stresses greater than those listed under MAXIMUM

RATINGS may cause permanent damage to the device.

This is a stress rating only and functional operation of

the device at these or any other conditions above those

indicatedintheoperationalsectionsofthisspecification

is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect reliability.

Maximum Ratings

(Above which the useful life may be impaired. For user guidelines, not tested.)

Notes:

1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.

2. Typical values are at VCC = 3.3V, +25°C ambient and maximum loading.

3. VOH = VCC – 0.6V at rated current.

4. This parameter is determined by device characterization but is not production tested.

5. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.

DC Electrical Characteristics (TA = –40°C to +85°C, VCC = 3.3V ± 0.3V)

Symbol

Parameters

Test Conditions(1)

Min.

Typ.

Max.

Units

VOH

Output High Voltage

VCC = Min.,

VIN = VIL or VIH

IOH = -0.1mA

IOH = -8mA

IOH = -12mA

VCC-0.2

2.4(3)

3.0

VOL

Output Low Voltage

VCC = Min.,

VIN = VIL or VIH

IOH = 0.1mA

IOH = 8mA

IOH = 12mA

0.2

0.3

0.2

0.4

VIH

Input High Voltage

Low Logic

2.0

5.5

VIL

Input Low Voltage

High Logic

-0.5

0.8

IIH

Input High Current

VCC = Max., VIN = 5.5V

µA

IIL

Input Low Current

VCC = Max., VIN = GND

-1

IOZH

IOZL

High Impedance

output current

VCC = Max., all

outputs disabled

VOUT = VCC

VOUT = GND

-1

VIK

Clamp Diode Voltage

VCC = Min., IIN = -18mA

-0.7

-1.2

IODH

Output High Current(4, 5)

VOUT = 1.5V, VIN = VIL or VIH, VCC = 3.3V

-40

-74

-100

IODL

Output Low Current(4, 5)

VOUT = 1.5V, VIN = VIL or VIH, VCC = 3.3V

130

IOS

Short Circuit Current(4, 5)

VCC = Max., VOUT = GND

-60

-100

-120

PI49FCT3805DSE Datasheet(PDF) 2 Page - Pericom Semiconductor Corporation

PI49FCT3805DSE Datasheet(HTML) 2 Page - Pericom Semiconductor Corporation

Html Pages

1 2 3 4 5 6 7 8

Datasheet Download

Link URL