LUXEON III Emitter DS45 (3/06)

2

Mechanical Dimensions

Lambertian

Notes:

1. The anode side of the device is denoted by a hole in the lead frame. Electrical insulation between the case and the board is

required—slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug.

2. All dimensions are in millimeters.

3. All dimensions without tolerances are for reference only.

Side Emitting

Notes:

1. The anode side of the device is denoted by a hole in the lead frame. Electrical insulation between the case and the board is

required—slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug.

2. Caution must be used in handling this device to avoid damage to the lens surfaces that will reduce optical efficiency.

3. All dimensions are in millimeters.

4. All dimensions without tolerances are for reference only.

Drawings not to scale

Drawings not to scale

TOP VIEW

BOTTOM VIEW