AP3415AI

-20V P-Channel Enhancement Mode MOSFET

AP3415AI Rve:1.2

臺灣永源微電子科技有限公司

Attention

1,Any and all APM Microelectronics products described or contained herein do not have

specifications that can handle applications that require extremely high levels of reliability, such as

life support systems, aircraft's control systems, or other applications whose failure can be

reasonably expected to result in serious physical and/or material damage. Consult with your APM

Microelectronics representative nearest you before using any APM Microelectronics products

described or contained herein in such applications.

2,APM Microelectronics assumes no responsibility for equipment failures that result from using

products at values that exceed, even momentarily, rated values (such as maximum ratings,

operating condition ranges, or other parameters) listed in products specifications of any and all

APM Microelectronics products described or contained herein.

3, Specifications of any and all APM Microelectronics products described or contained here

instipulate the performance, characteristics, and functions of the described products in the

independent state, and are not guarantees of the performance, characteristics, and functions of

the described products as mounted in the customer’s products or equipment. To verify symptoms

and states that cannot be evaluated in an independent device, the customer should always

evaluate and test devices mounted in the customer’s products or equipment.

4, APM Microelectronics Semiconductor CO., LTD. strives to supply high quality high reliability

products. However, any and all semiconductor products fail with some probability. It is possible

that these probabilistic failures could give rise to accidents or events that could endanger human

lives that could give rise to smoke or fire, or that could cause damage to other property. When

designing equipment, adopt safety measures so that these kinds of accidents or events cannot

occur. Such measures include but are not limited to protective circuits and error prevention circuits

for safe design, redundant design,and structural design.

5,In the event that any or all APM Microelectronics products(including technical data, services)

described or contained herein are controlled under any of applicable local export control laws and

regulations, such products must not be exported without obtaining the export license from the

authorities concerned in accordance with the above law.

6, No part of this publication may be reproduced or transmitted in any form or by any

means,electronic or mechanical, including photocopying and recording, or any information storage

or retrieval system, or otherwise, without the prior written permission of APM Microelectronics

Semiconductor CO., LTD.

8, Any and all information described or contained herein are subject to change without notice due

to product/technology improvement,etc. When designing equipment, refer to the "Delivery

7, Information (including circuit diagrams and circuit parameters) herein is for example only; it is

not guaranteed for volume production. APM Microelectronics believes information herein is

accurate and reliable, but no guarantees are made or implied regarding its use or any

infringements of intellectual property rights or other rights of third parties.

Specification" for the APM Microelectronics product that you Intend to use.