Page <2>

V1.0

23/10/19

Lead Free Solder Wire

Newark.com/exclusive-brands

Farnell.com/exclusive-brands

Element14.com/exclusive-brands

Part Number Table

Description

Part Number

Solder Wire, Sn 99.3/Cu 0.7, 0.7mm Dia, 100G

D01685

Solder Wire, Sn 99.3/Cu 0.7, 0.7mm Dia, 500G

D01686

Solder Wire, Sn 99.3/Cu 0.7, 1.2mm Dia, 100G

D01687

Solder Wire, Sn 99.3/Cu 0.7, 1.2mm Dia, 500G

D01688

Solder Wire, Sn 99.3/Cu 0.7, 0.7mm Dia, 50G

D03341

Solder Wire, Sn 99.3/Cu 0.7, 0.7mm Dia, 250G

D03342

Solder Wire, Sn 99.3/Cu 0.7, 1.2mm Dia, 12.5G

D03343

Solder Wire, Sn 99.3/Cu 0.7, 1.2mm Dia, 50G

D03344

Solder Wire, Sn 99.3/Cu 0.7, 1.2mm Dia, 250G

D03345

Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for

the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change

without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness,

any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make

any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or

where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its

negligence. DURATOOL is the registered trademark of Premier Farnell Limited 2019.

Alloy Composition

Sn

Cu

Ag

Ni

Bi

Zn

Ai

Sb

Fe

As

Cd

Pb

In

Au

Rem.

0.5~0.9 0.1 MAX

0~0.01

0.1 MAX 0.001

MAX

0.001

MAX

0.05

MAX

0.02

MAX

0.03

MAX

0.002

MAX

0.05

MAX

0.1

MAX

0.05

MAX