4

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

• The drill will be left unattended.

• Moving to another work area.

• Passing the drill to another person.

12. NEVER use the drill if it is defective or operating abnormally.

13. The drill should be serviced at regular intervals by qualified service

personnel.

14. AVOID damaging the drill for example by applying excessive force.

15. ALWAYS maintain the drill with care. Keep it clean for the best and safest

performance.

16. Quick change couplings should not be located at the drill. They add

weight and could fail due to vibration.

17. DO NOT force or misuse the drill. It will do a better and safer job at the rate

for which it was designed.

18. DO NOT remove any labels. Damaged labels should be replaced.

19. This drill vibrates with use. Vibration may be harmful to your hands or arms.

Stop using the drill. if discomfort, a tingling feeling or pain occurs. Seek

medical advice before resuming use.

TRANSPORT

1. NEVER carry the drill by the air supply hose.

2. NEVER carry the drill with your finger on the trigger.

STORAGE

1. When not in use the drill must be disconnected from the air supply and

stored in a dry place out of the reach of children (preferably in a locked

cabinet).

2. AVOID storing the drill in environments where the temperature is below 0oC.