2

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE product. Before attempting to use this

product, please read this manual thoroughly and follow the instructions

carefully. In doing so you will ensure the safety of yourself and that of others

around you, and you can look forward to your purchase giving you long and

satisfactory service.

GENERAL USER SAFETY

WORK ENVIRONMENT

1. Keep the work area clean and tidy.

2. Keep children and visitors away - DO NOT let children handle the tool.

3. DO NOT operate where there are flammable liquids or gases.

4. ALWAYS make sure there is adequate ventilation. DO NOT blast in confined

or enclosed areas.

5. Media used in this blast gun may be covered by COSHH Regulations.

PERSONAL SAFETY

1. Stay alert and use common sense. DO NOT operate the air tool when you

are tired or under the influence of alcohol, drugs or medication.

2. ALWAYS wear eye protection when using the blast gun- This must provide

protection from flying particles from the front and the side. NOTE:

Spectacles DO NOT give sufficient protection, correct goggles must be

worn, although a full face mask is strongly recommended.

3. ALWAYS wear a dust mask when operating this type of device. Dust masks

MUST ALWAYS BE WORN. Inhaling dust produced by the blasting process or

the possible inhalation or ingestion of soda is extremely hazardous.

4. DO NOT overreach - Keep proper footing and balance at all times.

USE OF COMPRESSED AIR POWERED TOOLS

1. NEVER use oxygen, CO2, combustible gases or any type of bottled gas as a

source of power for the tool.

CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN

PERSONAL INJURY, AND/OR DAMAGE TO PROPERTY.