Time Electronics

8030 Automatic Pressure Calibrator

Time Electronics Ltd, Unit 5, TON Business Park, 2-8 Morley Road, Tonbridge, Kent, TN9 1RA, United Kingdom

T: +44 (0) 1732 355993 | F: +44 (0) 1732 350198 | mail@timeelectronics.co.uk | www.timeelectronics.com

Technical Specifications

Pressure ranges .........................................................–1 to 100 bar (1500 psi). Configured based on customer range requirement.

Internal sensors..........................................................3 in total plus 1 barometric reference.

Pressure types............................................................Gauge, compound, absolute and differential.

Accuracy (per sensor) ...............................................0.01 % FS

......................................................................................0.03 % FS for low range and differential sensors (30 mbar to 300 mbar).

Precision .....................................................................< 0.005 % FS.

Barometric reference option .....................................Enables user to switch from gauge to absolute pressure.

......................................................................................Measuring range: 800 to 1,200 mbar absolute. Accuracy: 0.01 % RDG.

Pressure units.............................................................20 selectable and 1 programmable.

Control stability...........................................................< 0.005 % FS of the active sensor.

Control time ................................................................< 10 s.

Pressure ports ............................................................Minimess type with hoses supplied. BSP and NPT available.

Pressure media...........................................................Clean, dry, non-corrosive, non-combustible and non-oxidising gases.

Overpressure protection ...........................................150 % of the largest pressure range.

Screen .........................................................................7 ” TFT colour touch-screen (4 wire resistive).

Resolution ...................................................................up to 6 digits (user selectable).

Response time............................................................approx. 10 ms.

Warm-up time .............................................................approx. 10 minutes.

Communication interface ..........................................RS-232 and ethernet.

Power supply ..............................................................100 to 230 V AC, 50/60 Hz.

Supply port pressure .................................................Maximum 105 to 110 % FS.

Test port pressure ......................................................Maximum 105 % FS.

Operating temperature ..............................................10 to 40 °C (50 to 104 °F).

Storage temperature..................................................0 to 70 °C (32 to 158 °F).

Air humidity.................................................................0 to 95 % (relative humidity without moisture condensation).

Compensated temperature range ............................15 to 35 °C (59 to 95 °F).

Dimensions/Weight ....................................................W 235 x H 132 x D 375 mm / Weight: approx 12 kg depending on sensors ordered.

Additional 8030 versions ...........................................0 to 140 bar (2000 psi), 0 to 200 bar (3000 psi), 0 to 230 bar (3350 psi).

......................................................................................High pressure models can have up to 2 internal sensors plus 1 barometric reference.

......................................................................................Hydraulic version up to 1000 bar (see 8030-H data sheet).

Supplied with ..............................................................Contamination trap, 2 port manifold, hoses, fittings, power lead, user manuals.

Ordering Information

8030..........................................................................Automatic Pressure Calibrator/Controller

......................................................................................Can be configured with up to 3 sensors and a barometric reference.

8030BARO....................................................................Barometric reference option for 8030

7165..............................................................................8030 compressor pump (17, 35, 50 and 70 bar versions available, range based on 8030 ordered)

7149..............................................................................Electical vacuum pump

7161P ..............................................................................Quad port pneumatic manifold (for use up to 200 bar)

ECFLA ..........................................................................EasyCal Calibration Software (full user licence, accompanying calibrator discounted price)

Calibration Certificates.................................................Traceable calibration certificate (Factory) and Accredited calibration certificate (ISO 17025)

Additional options include instrument UUT stands, fittings, manifolds, pressure adaptor kits, hoses. Available upon request.

v3a

09/21

Due to continuous development Time Electronics reserves the right to change specifications without prior notice.