T +44 (0)1322 527 629

E light@lightgraphix.co.uk

www.lightgraphix.co.uk

LightGraphix reserve the right to change specifications without notice

Data sheet issued: 6 October 2021

Data sheet - Page 1

IP Connection Kit

Resin Kit for IP68 Rated Connections

Key Features

IP connections are very important when wiring fittings in wet or damp environments.

When fittings are not wired with an IP68 connection, water that pools around

exposed cables can corrode wires or be drawn through the cable sheath and

into the fitting, which can lead to irreparable damage. The IP connection kit is

designed for use in all exterior applications.

Up to 10 connections (11 LED fittings) per IP Kit

Designed for single colour constant current LED fittings and 24V linear

Quick and simple method of creating IP68 connections on site

Resin-filled cartridge for easy handling on site

Once fully cured it provides a reliable and robust protection

Potted connections ready to install within 2 hours (light handling)

Minimal size, can fit in cut-outs as small as 26mm in diameter

Works with both in series and parallel wiring

-

-

-

-

-

-

-

-

We would always recommend in exterior applications that connections are done in

a dry location if possible. LightGraphix products can be specified with longer leads

if needed. Connections should never be made under water. The IP Connection Kit

is designed and tested exclusively for use with LightGraphix Products.

1:1 Scale for

CAD Download

53

Cut-Out

Ø26

10

/IPKit10 IP68 Resin Kit

Cut-Out

Ø26

53

10

Constant Current (In-series wiring)

Up to 10 connections for 11 LED fittings per Resin Kit

Up to 4 Linear LED fittings per connection

24V Constant Voltage (Parallel wiring)

Please see attached instruction leaflet for more detailed instructions

Wiring

Installation

Dimensions

Description

Order Code

IP68 resin kit for 10 connections

/IPKit10

Order Code