4

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

22. Ensure that the jack is properly maintained and that no corrosion is allowed to

weaken any part of it.

23. If the jack has been subjected to an abnormal load it should be removed from

service immediately and fully inspected by qualified personnel and passed as

serviceable before being used again.

24. When not in use, store the jack, fully lowered, in a safe, dry, childproof area.

IMPORTANT: ALWAYS ensure that the centre of gravity of the load, is

centred about the head section, before taking the full weight.

LIFTING OPERATIONS AND LIFTING EQUIPMENT

Regulations 1998

This jack, depending on use, may fall within the scope of LOLER. It is the owner’s

responsibility to determine whether or not it does and, if so, to comply with any

applicable requirements in LOLER, for having the jack thoroughly examined.