3

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

downwards using two M8 bolts with each leg, ensuring a flat washer is used

with the nut. Nip up the nuts - DO NOT fully tighten.

3. Attach the front legs in a similar

manner using M8 bolts with nuts

and flat washers. DO NOT fully

tighten.

4. With the help of an assistant,

position the shelf between the legs,

and bolt it to the legs using M8 bolts

with nuts and flat washers. DO NOT

fully tighten the nuts.

•

NOTE The tray has an upstand at

the back only.

5. Turn the workbench on to its feet

and shake it vigorously to ensure it

is completely stable and resting

evenly on all four legs, then fully

tighten all nuts.

6. Fit the drawer runners to their

locations on the workbench frame

by engaging the tabs with the slots.

7. Slot the drawer into place in the

runners.

8. If a CD3WB 3-drawer unit is

purchased, this can be slotted into

place on the spare runners.