16

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

5. Press the menu button to select

MMA welding mode.

•

The current can be adjusted in this

mode to match the material

being welded.

•

To select the parameter use the

menu to cycle between function.

6. Press the menu button to select

Anti-Stick mode and switch it on

or off by pressing the MENU

control and turning the control

knob.

7. Set the required current using the

current selector knob.

•

With practice you will gain a feel

for the correct current setting for

different welding rod thicknesses.

•

The “Hot Start” function will be

enabled which delivers a high

current when striking the arc to

prevent the rod from sticking.

•

“Arc Force” will deliver a

temporary increase in output current during welding when the arc is too

short. This assists with welding by giving a consistent arc delivery to

compensate for the positioning of the rod.