Page <1>

V1.0

08/05/20

Fray Resistant, Flame Retardant,

Expandable Sleeving

Newark.com/multicomp-pro

Farnell.com/multicomp-pro

Element14.com/multicomp-pro

Features

• Black with white tracer

• Fray resistant, can be cut with scissors

• Rated to 125ºC

• Low temperature flexibility to -70ºC

• VW-1

• F.A.R. Part 25

• Does not trap heat or humidity

• Rot-free

• Self-fitting over many shapes and sizes

Performance Data

Property

Test Method

Value

Filament Diameter

-

0.01″

Melt Temperature

ASTM D-2117

239°C

Low Temperature Flexibility

MIL-DTL-23053E

-70°C

Flammability

UL 1441

VW-1

Flammability

F.A.R. Part 25

Pass

Smoke Density

ASTM E-1354

Dmc = 5.72

Copper Corrosivity

MIL-I-23053

No Effect

Specification Table

Part Number

Nominal

Dia.

(Inches)

Maximum

Dia.

(Inches)

Spool Length

(Feet)

SPC12221

1/8

1/4

100

SPC12222

1/4

7/16

100

SPC12223

3/8

1/2

100

SPC12224

1/2

3/4

100

SPC12225

3/4

1-1/4

50

SPC12226

1-1/4

1-3/4

50

SPC12227

1-3/4

2-3/4

25

SPC12228

2

3-1/2

25

SPC12229

2-1/2

4-1/2

25

Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for

the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change

without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness,

any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make

any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or

where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its

negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.