E3ZM

3

Ordering Information

Sensors (Refer to Dimensions on page 15.)

*1. The Reflector is sold separately. Select the Reflector model most suited to the application.

*2. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.

*3. Pre-wired Models with a 5-m cable are also available for these products. When ordering, specify the cable length by adding "5M" to the end of the model number

(e.g., E3ZM-LT61 5M).

*4. Through-beam Models are also available with a light emission stop function. When ordering, add "-G0" to the end of the model number (e.g., E3ZM-T61-G0).

*5. The model number of the Emitter is expressed by adding an "L" to the set model number in the table. Example: E3ZM-T61-L 2M

The model number of the receiver is expressed by adding a "D" to the set model number in the table. Example: E3ZM-T61-D 2M

Orders for individual Emitters and Receivers are accepted. (Modifications are required for some models.)

Accessories (Order Separately)

Reflectors (A Reflector is required for Retro-reflective Sensors: A Reflector is not provided with the Sensor. Be sure to order a Reflector.)

(Refer to Dimensions on E39-L/F39-L/E39-S/E39-R.)

Note: When using a Reflector without a rated value, use 0.7 times typical value as a guideline for the sensing distance.

* Values in parentheses indicate the minimum required distance between the Sensor and Reflector.

Sensing

method

Appear-

ance

Connection method

Sensing distance

Model

NPN output

PNP output

Through-

beam *4

(Emitter +

Receiver) *5

Pre-wired (2 m) *3

E3ZM-T61 2M

E3ZM-T81 2M

Connector (M8, 4 pins)

E3ZM-T66

E3ZM-T86

Pre-wired (2 m) *3

E3ZM-T63 2M

E3ZM-T83 2M

Connector (M8, 4 pins)

E3ZM-T68

E3ZM-T88

Retro-

reflective with

MSR function

Pre-wired (2 m) *3

E3ZM-R61 2M

E3ZM-R81 2M

Connector (M8, 4 pins)

E3ZM-R66

E3ZM-R86

Diffuse-

reflective

Pre-wired (2 m) *3

E3ZM-D62 2M

E3ZM-D82 2M

Connector (M8, 4 pins)

E3ZM-D67

E3ZM-D87

BGS

reflective

(fixed

distance)

Pre-wired (2 m) *3

E3ZM-LS61H 2M

E3ZM-LS81H 2M

Connector (M8, 4 pins)

E3ZM-LS66H

E3ZM-LS86H

Pre-wired (2 m) *3

E3ZM-LS62H 2M

E3ZM-LS82H 2M

Connector (M8, 4 pins)

E3ZM-LS67H

E3ZM-LS87H

Pre-wired (2 m) *3

E3ZM-LS64H 2M

E3ZM-LS84H 2M

Connector (M8, 4 pins)

E3ZM-LS69H

E3ZM-LS89H

Name

E3ZM-R

Sensing distance (typical) *

Model

Quantity

Remarks

Reflector

3 m (100 mm) (rated value)

E39-R1

1

• Reflectors are not provided with Retro-re-

flective models.

• The MSR function is enabled.

4 m (100 mm) (rated value)

E39-R1S

1

5 m (100 mm)

E39-R2

1

2.5 m (100 mm)

E39-R9

1

3.5 m (100 mm)

E39-R10

1

Fog Preventive Coating

3 m (100 mm)

E39-R1K

1

Small Reflector

1.5 m (50 mm)

E39-R3

1

Tape Reflector

700 mm (150 mm)

E39-RS1

1

1.1 m (150 mm)

E39-RS2

1

1.4 m (150 mm)

E39-RS3

1

Red light

Infrared light

15 m

0.8 m

(apertures built in)

*1

4 m

(100 mm)

(Using E39-R1S)

*2

1 m

10 to 100 mm

10 to 150 mm

10 to 200 mm