TDA7572 datasheet(7/64 Pages) STMICROELECTRONICS

7 / 64 page

TDA7572

Detailed features

7/64

Detailed features

●

Input Stage and Gain Compressor

–

Differential, high CMRR, analog input

–

Programmable input attenuation/gain to support up to four drive levels

–

Noiseless Gain compression of up to 16 dB with programmable attack and decay.

–

Compressor controlled by monitoring estimated THD

–

Soft mute / un-mute for pop control

●

Over-modulation Protection and Current Limiting

–

Adaptive pulse injection prevents missing pulses due to over modulation which

maximizes useful output swing.

–

Programmable current limiting based on FET VDS

●

Modulator

–

Optimized for low distortion at low switching frequency (approximation 110KHz)

–

Dual Clocked PWM modulators for 3 state switching

–

External gain control / internal integrator components

–

Controls 4 external FETS with switching optimized for low EMI

–

Oscillation frequency selectable by I2C

–

Anti-pop shunt driver

●

DAC

–

18bit, mono

–I2S inputs 38-48KHz, 96KHz, 192 KHz

–

Hybrid architecture, area optimized for Bass

–

Full bandwidth supported by off loading the interpolator function

–

Synchronization with modulator

●

Step-Up

–

On board STEP-UP step up converter, synchronized to the modulator frequency

–

Drives external NFET switch

–

Externally compensated

–

Soft start and current limiting

●

Mode Control

–

Critical modes controllable by mode pins for bus-less operation

–I2C provides additional mode control

●

Diagnostics / Safety

–

Offset, short, open, overcurrent, over temperature

–I2C used to report errors, and for configuration control

–

Faults pin used to report errors in bus-less environment

–

Clipping reported at a separate pin

–

Abnormal supply current detection disables input power for fail safe operation

–

Output current limiting

–

Power control

–

Latching control of an external PMOS power switch for safety related faults.

–

Power is switched off for safety related faults of abnormal supply current,

excessive internal or external temperature, or persistent output stage over-current

that fails to be controlled by the pulse-by-pulse current limiting method

TDA7572 Datasheet(PDF) 7 Page - STMicroelectronics

TDA7572 Datasheet(HTML) 7 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Datasheet Download

Link URL