1.

General description

The 74HC153; 74HCT153 is a dual 4-input multiplexer. The device features independent

enable inputs (nE) and common data select inputs (S0 and S1). For each multiplexer, the

select inputs select one of the four binary inputs and routes it to the multiplexer output

(nY). A HIGH on E forces the corresponding multiplexer outputs LOW. Inputs include

clamp diodes. This enables the use of current limiting resistors to interface inputs to

voltages in excess of VCC.

2.

Features and benefits

 Input levels:

 For 74HC153: CMOS level

 For 74HCT153: TTL level

 Non-inverting outputs

 Separate enable input for each output

 Common select inputs

 Complies with JEDEC standard no. 7A

 Permits multiplexing from n lines to 1 line

 Enable line provided for cascading (n lines to 1 line)

 ESD protection:

 HBM JESD22-A114F exceeds 2000 V

 MM JESD22-A115-A exceeds 200 V

 Multiple package options

 Specified from

40 C to +85 C and 40 C to +125 C.

3.

Ordering information

74HC153; 74HCT153

Dual 4-input multiplexer

Rev. 6 — 11 May 2016

Product data sheet

Table 1.

Ordering information

Type number

Package

Temperature range

Name

Description

Version

74HC153D

40 C to +125 C

SO16

plastic small outline package; 16 leads; body width

3.9 mm

SOT109-1

74HCT153D

74HC153DB

40 C to +125 C

SSOP16

plastic shrink small outline package; 16 leads; body

width 5.3 mm

SOT338-1

74HCT153DB

74HC153PW

40 C to +125 C

TSSOP16

plastic thin shrink small outline package; 16 leads;

body width 4.4 mm

SOT403-1

74HCT153PW