8 3/23

Please read Cautions and warnings and

Important notes at the end of this document.

EMI suppression capacitors (MKP)

B32032 ... B32036

Y2 / 350 V AC

Pulse handling capability

"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal

voltages, expressed in V/μs.

"k0" represents the maximum permissible pulse characteristic of the waveform applied to the capa-

citor, expressed in V2/μs.

Note:

The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the

capacitor. These parameters are given for isolated pulses in such away that the heat generated by

one pulse will be completely dissipated before applying the next pulse. For a train of pulses, please

refer to the curves of permissible AC voltage-current versus frequency.

dV/dt and k0 values

Impedance Z versus frequency f (typical values)

Lead Spacing

15 mm

22.5 mm

27.5 mm

37.5 mm

dV/dT in (V/µs)

600

500

400

300

K0 in ( V2/μs)

508 000

423 000

338 000

254 000