Film Capacitors – Power Factor Correction

B25675C*

PhaseCap Energy Plus

MKK

Preliminary data

CAP FILM ES PFC PM

2021-06-24

Please read Cautions and warnings and

Page 3 of 17

Important notes at the end of this document.

Maximum ratings

Maximum permissible AC voltage

(Vmax)

VN +10% (up to 8 h daily)

VN +15% (up to 30 min. daily)

VN +20% (up to 5 min. daily)

VN +30% (up to 1 min. daily)

Maximum permissible AC current

(Imax)

Up to 1.6

... 2.0 • IN (A) up to 33.1 kvar

Up to 1.6

• IN (A) above 33.1 kvar

(

including combined effects of harmonics, overvoltage’s and

capacitance tolerance)

Maximum inrush current

(IS)

≤ 500

• IN (A) depending on the individual type upto 33.1 kvar

≤ 400

• IN (A) depending on the individual type above 33.1 kvar

Max. 15000 switching’s per year up to 33.1 kvar

Max. 7500 switching’s per year above 33.1 kvar

Maximum allowed hotspot temperature

+85 °C (short time considering effect of all worst case operating

parameters like voltage, current, harmonic, ambient temperature

and ventilation)

Test data

Voltage test between terminals

2.15

• VN V AC / 50 Hz, 2s

Voltage test between terminals (joined

together) and container

3600 V AC / 50 Hz, 2 s up to VN = 525 V AC

6000 V AC / 50 Hz, 2 s above VN = 525 V AC

Environmental conditions

Minimum ambient temperature

-40 °C

Maximum ambient temperature

+60 °C (short time) up to 33.1 kvar

+55 °C (short time) above 33.1 kvar

Ambient temperature

Class -40/60 up to 33.1 kvar: Max. short time: +60 °C, max. mean

24 h: +50 °C; max mean 1 year: +40 °C; lowest temperature: -40 °C

Class -40/D above 33.1 kvar: Max. short time: + 55 °C, max. mean

24 h: +45 °C; max mean 1 year: +35 °C; lowest temperature: -40 °C

Storage temperature

-40 °C to + 85 °C (capacitor must be cooled down below +50 °C

before energized)

Humidity

Average relative < 95% (non condensing)

Vibration (Sinusoidal)

As per IEC 60721-3-2 (Transportation)

Max. test conditions -

Frequency: 8 to 200 Hz

Acceleration: 2 g

Displacement: 7.5 mm