ST486DX datasheet(11/34 Pages) STMICROELECTRONICS

11 / 34 page

Instruction

Opcode

Parameters

Core Clocks

RSM

0F AA

None

Instruction

Opcode

Parameters

Core Clocks

RSTS

0F 7D [mod 000 r/m]

mem80

Instruction

Opcode

Parameters

Core Clocks

SMINT

0F 7E

None

Instruction

Opcode

Parameters

Core Clocks

RSLDT

0F 7B[mod 000 r/m]

mem80

2.3.2

RSLDT - Restore LDT and Descriptor

ST486DX - SMM IMPLEMENTATION

RSLDT loads the information at the mem80 into Local Descriptor Table Register and its associated

descriptor.

2.3.3

RSM - Resume Back to Normal Mode

RSM will restore the state of the CPU from the SMM header at the top of SMM space and exit

SMM. This is the last instruction executed in an SMI handler. After the CPU state is restored, the

SMI# pin is driven inactive for one clock then floated so the pin can be driven by the system.

2.3.4

RSTS - Restore TSR and Descriptor

RSTS loads the information at the mem80 address into the Task Register and its associated

descriptor.

2.3.5

SMINT - Software SMM Interrupt

SMINT will cause the CPU to enter SMM as though the hardware SMI# pin was sampled low.

The S bit in the SMM header is set. The SMI# signal is not driven by the CPU when SMM is en-

tered with SMINT.

ST486DX Datasheet(PDF) 11 Page - STMicroelectronics

ST486DX Datasheet(HTML) 11 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Datasheet Download

Link URL