ST52X430KIT datasheet(46/88 Pages) STMICROELECTRONICS

46 / 88 page

ST52T430/E430

46/88

If input voltage is less than VSS (voltage reference

low) then the result is equal to 00h.

The A/D converter is linear and the digital result of

the conversion is provided by the following

formula:

Where Reference Voltage is Vdda - Vss.

The accuracy of the conversion is described in the

Electrical Characteristics Section.

The A/D converter is not affected by the WAIT

mode.

When the MCU enters HALT mode with A/D

converter enabled, the converter is disabled until

HALT mode is terminated and the start-up delay

has elapsed. A stabilization period is also required

before accurate conversions can be performed.

Figure 8.2 Conf. Register (REG_CONF 3)

8.2.1 Operating Modes.

Four main operating modes can be selected by

setting the values of the LP and SEQ bit in the A/D

configuration Register.

One Channel Single Mode

In this mode (SEQ = ‘0’’, LP = ‘0’) the A/D provides

an EOC signal after the end of channel i-th

conversion; then the A/D waits for a new start

event. Channel i-th is identified by the bit CH0,

CH1, CH2.

i.e CH(2:0) = ‘011’ means conversion of channel 3

then stop.

Multiple Channels Single Mode

In this mode (SEQ = ‘1’, LP = ‘0’) the A/D provides

an EOC signal after the end of the channels

sequence conversion identified by the bit CH0,

CH1, CH2; then the A/D waits for a new start event.

i.e. CH(2:0) = ‘011’ means conversion of channels

0,1,2 and 3 then stop.

Digitalr es ult

255inputVoltage

re fe re nce V oltage

------------------------------------------------

D 7

CH2 CH1 CH0 SCK SEQ POW

LP STR

REG_CONF 3

START/STOP

CONVERSION MODE SEL.

ON/OFF A/D

CONVERSION MODE SEL.

CLOCK SELECTOR

CHANNELS SEL.

ST52X430KIT Datasheet(PDF) 46 Page - STMicroelectronics

ST52X430KIT Datasheet(HTML) 46 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88

Datasheet Download

Link URL