T410 datasheet(75/84 Pages) STMICROELECTRONICS

75 / 84 page

ST52T410/ST52T420/E420

75/84

11.8 Port Pin Characteristics

11.8.1 General Characteristics.

Subject to general operating condition for VDD,fosc, and TA, unless otherwise specified.

Notes:

1. Unless otherwise specified, typical data is based on TA=25 °C and VDD=5 V

2. Hysteresis voltage between Schmitt trigger switching level. Based on characterization results, not

tested in production.

3. Configuration is not recommended, all unused pins must be kept at a fixed voltage: using the output

mode of the I/O for example or an external pull-up or pull-down resistor (see Figure 11.11). Data based

on design simulation and/or technology characteristics is not tested in production.

Figure 11.11 Recommended configuration for unused pins

Symbol

Parameter

Condition

Min

Typ1)

Max

Unit

VIL

CMOS type low level input voltage.

Port B pins. (See Figure 11.13)

TTL type Schmitt trigger low level

input voltage. Port A and Port C

pins. (See Figure 11.12)

0.8

VIH

CMOS type high level input voltage.

Port B pins. (See Fig 11.13)

3.3

TTL type Schmitt trigger high level

input voltage. Port A and Port C

pins. (See Fig. 11.12)

2.2

Vhys

Schmitt trigger voltage hysteresis 2)

1.4

Input leakage current

VSS≤VIN≤VDD

-1

µA

Static current consumption3)

Floating input mode

200

VDD

ST52

UNUSED I/O PORT

10k

UNUSED I/O PORT

ST52

10k

T410 Datasheet(PDF) 75 Page - STMicroelectronics

T410 Datasheet(HTML) 75 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84

Datasheet Download

Link URL