| Electronic Components Datasheet Search |
|
ST72E331 Datasheet(PDF) 36 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST72E331 Datasheet(HTML) 36 Page - STMicroelectronics |
|
36 / 107 page ![]() 36/107 ST72E331 ST72T331 EEPROM (Cont’d) 5.2.4 Low Power Modes 5.2.5 Interrupts Note: This event generates an interrupt if the corresponding Enable Control Bit is set and the I-bit in the CC register is reset (RIM instruction). 5.2.6 Register Description EEPROM CONTROL REGISTER (CR) Read/Write Reset Value: 0000 0000 (00h) Bit 7:3 = Reserved, forced by hardware to 0. Bit 2 = E2ITE: Interrupt enable. This bit is set and cleared by software. It enables the Data EEPROM interrupt capability when the E2PGM bit is cleared by hardware. The interrupt re- quest is automatically cleared when the software enters the interrupt routine. 0: Interrupt disabled 1: Interrupt enabled Bit 1 = E2LAT: Read/Write mode. This bit is set by software. It is cleared by hard- ware at the end of the programming cycle. It can only be cleared by software if E2PGM=0. 0: Read mode 1: Write mode Bit 0 = E2PGM: Programming Control. This bit is set by software to begin the program- ming cycle. At the end of the programming cycle, this bit is cleared by hardware and an interrupt is generated if the E2ITE bit is set. 0: Programming finished or not started 1: Programming cycle is in progress Note: if the E2PGM bit is cleared during the pro- gramming cycle, the memory data is not guaran- teed. Mode Description WAIT The EEPROM can enter WAIT mode on execution of the WFI instruction of the microcontroller. The EEPROM will immediately enter this mode if there is no programming in progress, other- wise the EEPROM will finish the cycle and then enter WAIT mode. The EEPROM interrupt exits from Wait mode. HALT The EEPROM immediately enters HALT mode if the microcontroller executes the HALT in- struction. Therefore the EEPROM will stop the function in progress, and data may be corrupt- ed. Interrupt Event Event Flag Enable Control Bit Exit from Wait Exit from Halt End of Programming Cycle E2PGM E2ITE Yes No 70 0 0 0 0 0 E2ITE E2LAT E2PGM 36 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |