•

V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005

www.v-infinity.com

1-866-372-1258

Ch1

Ch2

DC output voltage

5V

24V

Output V. tolerance

±2%

±6%

Output rated current

1.2A

0.8A

Output current range

0.2-2A

0.1-1A

Ripple & noise (Vp-p)

50m

200m

Line regulation

±0.5%

±2%

Load regulation

±1%

±4%

DC output power

25W

Efficiency

77%

DC voltage adj.

---

Input voltage range

85~264VAC 47~63Hz; 120-370VDC

AC current

0.65A/115V 0.4A/230V

Inrush current

cold start 40A

Leakage current

<0.5mA/240VAC

Overload protection

above 105%

type: Hiccup mode, recovers automatically after fault condition is removed

Over voltage protection

CH1, CH2: 115%~135%

Over temp. protection

U1 Tj 135°C typical power shutdown

Temperature coefficient

±0.03% / °C (0~50°C) on CH1 output

Set up, rise, hold up time

250ms, 30ms, 16ms/115VAC 250ms, 50ms, 50ms/230VAC

Vibration

10~500Hz, 2G 10 min./1 cycle, period of 60 min. each axes

Withstand voltage

I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, for 1 min.

Isolation resistance

I/P-O/P, I/P-FG, O/P-FG: 500VDC / 100M Ohms min.

Working temp., humidity

-10°C~+60% (refer to output derating curve), 20%-90% RH

Storage temp., humidity

-20°C~+85°C, 10%-95% RH

Dimensions

4.21x2.4x1.1 inches (107x61x28 mm)

Weight

0.33lbs (.15 Kgs)

Safety standards

UL1950, TUV EN60950 approved

EMC standards

CISPR22 (EN55022), IEC1000-4,2,3,4,5 IEC1000-3-2, 3 verification

Notes:

1. All parameters are specified at 230VAC input, rated load, 25°C 70% RH ambient

2. Tolerance includes set up tolerance, line regulation, load regulation

3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor

4. Line regulation is measured from low line to high line at rated load

5. Load regulation is measured from 20% to 100% rated load, other outputs at 60% rated load

6. Each output provides up to maximum current, but total load can not exceed max. output power

V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise cus

tomers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for cus

tomer ’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s pub

lished specifications. Nothing will be covered outside of standard product warranty.

Features

·Universal AC input / Full range

·Low leakage current<0.5mA

·Protections:Short circuit/Over load/Over voltage/

Over temperature

·Cooling by free air convection

·100% full load burn-in test

·Fixed switching frequency at 100KHz

·Low cost

·High reliability

·2 year warranty