Absolute maximum ratings and operating conditions

TS924

2/14

1

Absolute maximum ratings and operating conditions

Table 1.

Absolute maximum ratings

Symbol

Parameter

Value

Unit

1.

All voltage values, except differential voltage are with respect to network ground terminal.

14

V

2.

Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. If

resistor must be added to limit input current.

±1

V

3.

Do not exceed 14 V.

V

Storage temperature

-65 to +150

°C

Maximum junction temperature

150

°C

DIP14

SO-14

TSSOP14

4.

103

66

100

°C/W

ESD

5.

Human body model: A 100 pF capacitor is charged to the specified voltage, then discharged through a

1.5 k

Ω resistor between two pins of the device. This is done for all couples of connected pin combinations

while the other pins are floating.

3kV

6.

Machine model: A 200 pF capacitor is charged to the specified voltage, then discharged directly between

two pins of the device with no external series resistor (internal resistor < 5

Ω). This is done for all couples of

connected pin combinations while the other pins are floating.

100

V

7.

Charged device model: all pins and the package are charged together to the specified voltage and then

discharged directly to the ground through only one pin. This is done for all pins.

1kV

Output short-circuit duration

8.

excessive heating. The maximum output current is approximately 80 mA, independent of the magnitude of

Latch-up immunity

200

mA

Soldering temperature (10 sec), leaded version

250

°C

Soldering temperature (10 sec), unleaded version

260

°C

Table 2.

Operating conditions

Symbol

Parameter

Value

Unit

Supply voltage

2.7 to 12

V

Common mode input voltage range

V

Operating free air temperature range

-40 to +125

°C