TECHNICAL

DATA

4

Resistance to physical and chemical stresses

LF has passed through qualification processes of HUMIREL including vibration, shock,

storage, high temperature and humidity, ESD.

atmosphere, SO2 (0.5%, H2S (0.5%), 03, NOx, NO, CO, CO2, Softener, Soap, Toluene, acids (H2SO4, HNO3,

HCI), HMDS, Insecticide, Cigarette smoke, this is not an exhaustive list.

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsability is assumed for inaccuracies. Furthermore, this information does not convey

to the purchaser of such devices any license under the patent rights to the manufacturer. Humirel reserves the right to make changes without further notice to any product herein. Humirel

makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Humirel assume any liability arising out of the application or use

of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. « Typical » parameters can and do vary in different

applications. All operating parameters, including « Typical » must be validated for each customer applications by customer’s technical experts. Humirel does not convey any license under its

patent rights nor the rights of others. Humirel products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other appli-

cation intended to support or sustain life, or for any application in which the failure of the Humirel product could create a situation where personal injury or death may occur. Should buyer

purchase or use Humirel products for any such unintended or unauthorized application, Buyer shall indemnify and hold Humirel and its officers, employees, subsidaries, affiliates and distribu-

tors harmless against all claims, costs, damages and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of presonal injury or death associated with such unin-

tended or unauthorized use, even if such claim alleges that Humirel was negligent regarding the design or manufacture of the part.Humirel is a registred trade mark of Humirel.

Humirel Sensor Device Data / HPC053 RevD June 2005

Connector type : JST model S4B-ZR

to be mated with ZHR or 04ZR type female connectors

ORDERING INFORMATION (Multiple Package Quantity of 50 pieces) :HPP808G031

HTF3226LF

: Humidity Frequency output + NTC (Temperature direct output)

Dimensions in millimeters

Dim

HJKLMN

Φ

Min

4.8

7.3

3.0

Max

6.2

7.7

3.4

Dim

ABCDEFG

Min

9.7

8.5

28.0 14.5 1.5 3.5 1.45

Max 10.8 9.5 29.0 15.5 1.7 3.9 1.55

email : sales@humirel.com

SAMPLE KIT OF HTF 3226LF

IS AVAILABLE THROUGH

HUMIREL WEB SITE

www.humirel.com