HD6432142 datasheet(657/1177 Pages) RENESAS

657 / 1177 page

Section 20 A/D Converter

Rev. 4.00 Sep 27, 2006 page 613 of 1130

REJ09B0327-0400

Section 20 A/D Converter

20.1

Overview

This LSI incorporate a 10-bit successive-approximations A/D converter that allows up to eight

analog input channels to be selected.

In addition to the eight analog input channels, up to 16 channels of digital input can be selected for

A/D conversion. Since the conversion precision falls when digital input is selected, digital input is

ideal for use by a comparator identifying multi-valued inputs, for example.

20.1.1

Features

A/D converter features are listed below.

• 10-bit resolution

• Eight (analog) or 16 (digital) input channels

• Settable analog conversion voltage range

 The analog conversion voltage range is set using the reference power supply voltage pin

(AVref) as the analog reference voltage

• High-speed conversion

 Minimum conversion time: 6.7 µs per channel (at 20-MHz operation)

• Choice of single mode or scan mode

 Single mode: Single-channel A/D conversion

 Scan mode:

Continuous A/D conversion on 1 to 4 channels

• Four data registers

 Conversion results are held in a 16-bit data register for each channel

• Sample and hold function

• Three kinds of conversion start

 Choice of software or timer conversion start trigger (8-bit timer), or ADTRG pin

• A/D conversion end interrupt generation

 An A/D conversion end interrupt (ADI) request can be generated at the end of A/D

conversion

HD6432142 Datasheet(PDF) 657 Page - Renesas Technology Corp