HD6432142 datasheet(934/1177 Pages) RENESAS

934 / 1177 page

Section 26 Electrical Characteristics

Rev. 4.00 Sep 27, 2006 page 890 of 1130

REJ09B0327-0400

Item

Symbol

Min

Typ

Max

Unit

Test

Conditions

Analog power supply voltage*

4.5

—

5.5

Operating

2.0

—

5.5

Idle/not used

RAM standby voltage

RAM

2.0

—

Notes: 1. Do not leave the AVCC, AV

ref, and AVSS pins open even if the A/D converter and

D/A converter are not used.

Even if the A/D converter and D/A converter are not used, apply a value in the range

2.0 V to 5.5 V to AVCC and AV

ref pins by connection to the power supply (VCC), or some

other method. Ensure that AV

ref ≤ AVCC.

2. P67 to P60 include supporting module inputs multiplexed on those pins.

IRQ2 includes the ADTRG signal multiplexed on that pin.

4. When IICS = 0. Low-level output when the bus drive function is selected is determined

separately.

5. The upper limit of the applied voltage on Ports 6 and A is V

CC +0.3 V when CIN input is

not selected, and the lower of V

CC +0.3 V and AVCC +0.3 V when CIN input is selected.

When a pin is in output mode, the output voltage is equivalent to the applied voltage.

6. Current dissipation values are for V

IH min = VCC –0.2 V, and VIL max = 0.2 V with all

output pins unloaded and the on-chip pull-up MOSs in the off state.

7. The values are for V

RAM ≤ VCC < 4.5V, VIH min = VCC –0.2 V, and VIL max = 0.2 V.

HD6432142 Datasheet(PDF) 934 Page - Renesas Technology Corp

HD6432142 Datasheet(HTML) 934 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL