TS486 datasheet(3/31 Pages) STMICROELECTRONICS

3 / 31 page

TS486-TS487

3/31

FIXED GAIN VERSION SPECIFIC ELECTRICAL CHARACTERISTICS

VCC from +5V to +2V, GND = 0V, Tamb = 25°C (unless otherwise specified)

APPLICATION COMPONENTS INFORMATION

TYPICAL APPLICATION SCHEMATICS

Symbol

Parameter

Min.

Typ.

Max.

Unit

RIN 1,2

Input Resistance 1)

See figure 30 to establish the value of Cin vs. -3dB cut off frequency.

Ω

Gain value for Gain TS486/TS487-1

Gain value for Gain TS486/TS487-2

Gain value for Gain TS486/TS487-4

0dB

6dB

12dB

Components

Functional Description

RIN1,2

Inverting input resistor which sets the closed loop gain in conjunction with RFEED. This resistor also

forms a high pass filter with CIN (fc = 1 / (2 x Pi x RIN x CIN)) . Not needed in fixed gain versions.

CIN1,2

Input coupling capacitor which blocks the DC voltage at the amplifier’s input terminal.

RFEED1,2

Feedback resistor which sets the closed loop gain in conjunction with RIN.

AV= Closed Loop Gain= -RFEED/RIN. Not needed in fixed gain versions.

Supply Bypass capacitor which provides power supply filtering.

Bypass capacitor which provides half supply filtering.

COUT1,2

Output coupling capacitor which blocks the DC voltage at the load input terminal.

This capacitor also forms a high pass filter with RL (fc = 1 / (2 x Pi x RL x COUT)).

TS486 Datasheet(PDF) 3 Page - STMicroelectronics