
CY29949
2.5V or 3.3V 200 MHz 1:15
Clock Distribution Buffer
Cypress Semiconductor Corporation
•
198 Champion Court
•
San Jose
, CA 95134-1709
•
408-943-2600
Document #: 38-07289 Rev. *E
Revised October 22, 2008
Features
■ 2.5V or 3.3V operation
■ 200-MHz clock support
■ LVPECL or LVCMOS/LVTTL clock input
■ LVCMOS/LVTTL compatible outputs
■ 15 clock outputs: drive up to 30 clock lines
■ 1X and 1/2X configurable outputs
■ Output three-state control
■ 350 ps maximum output-to-output skew
■ Pin compatible with MPC949, MPC9449
■ Available in Commercial and Industrial temperature range
■ 52-pin TQFP package
Description
The CY29949 is a low voltage 200 MHz clock distribution
buffer with the capability to select either a differential LVPECL
or LVCMOS/LVTTL compatible input clocks. These clock
sources are used to provide for test clocks and primary system
clocks. All other control inputs are LVCMOS/LVTTL
compatible. The 15 outputs are LVCMOS or LVTTL compatible
and can drive 50
Ω series or parallel terminated transmission
lines. For series terminated transmission lines, each output
can drive one or two traces giving the device an effective
fanout of 1:30.
The CY29949 is capable of generating 1X and 1/2X signals
from a 1X source. These signals are generated and retimed
internally to ensure minimal skew between the 1X and 1/2X
signals. SEL(A:D) inputs allow flexibility in selecting the ratio
of 1X to1/2X outputs.
The CY29949 outputs can also be three-stated via the
MR/OE# input. When MR/OE# is set HIGH, it resets the
internal flip-flops and three-states the outputs.
Logic Block Diagram
0
1
1
2
0
1
1
2
0
1
0
1
DSELA
DSELB
DSELC
DSELD
MR/OE#
1
2
1
2
0
1
0
1
2
3
4
6
QA(0:1)
QB(0:2)
QC(0:3)
QD(0:5)
PECL_SEL
TCLK_SEL
PECL_CLK
PECL_CLK#
R
R
R
R
[+] Feedback