Electronic Components Datasheet Search
  English  ▼

X  

IL33197A Datasheet(PDF) 2 Page - IK Semicon Co., Ltd

Part # IL33197A
Description  Automotive Wash Wiper Timer
PDF  7 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  IKSEMICON [IK Semicon Co., Ltd]
Direct Link  http://www.iksemi.com/en/index.html
Logo IKSEMICON - IK Semicon Co., Ltd

IL33197A Datasheet(HTML) 2 Page - IK Semicon Co., Ltd

  IL33197A Datasheet HTML 1Page - IK Semicon Co., Ltd IL33197A Datasheet HTML 2Page - IK Semicon Co., Ltd IL33197A Datasheet HTML 3Page - IK Semicon Co., Ltd IL33197A Datasheet HTML 4Page - IK Semicon Co., Ltd IL33197A Datasheet HTML 5Page - IK Semicon Co., Ltd IL33197A Datasheet HTML 6Page - IK Semicon Co., Ltd IL33197A Datasheet HTML 7Page - IK Semicon Co., Ltd  
Zoom Inzoom in Zoom Outzoom out
 2 / 7 page
background image
IL33197A
Representative Block Diagram
This device contains 390 active transistors.
ELECTRICAL CHARACTERISTICS (–45°C 3 TA ≤ +125°C, 8.0 V ≤ VCC ≤ 16 V, unless otherwise noted. Typical
values reflect approximate mean at TA = 25°C with VCC = 14 V at the time of initial device characterization.)
NOTES: 1. The oscillator frequency is defined by the current flowing through the external resistor R2. The voltage at the INT pin is
(VCC/2 – Vbe) and hence the current flowing through R3 is different if R3 is connected to Vbb or to Gnd because of the
voltage drop across resistor R1. This voltage drop causes the oscillator coefficient for tb2 to be different for the two cases of
INT terminated to Gnd or to Vbb. Because of this, the oscillator coefficient is specified with a specific value of R1
whenever INT is connected to Vbb. If R1 is changed, the coefficient will change. Also, any extra current through the
resistor R1 other than the current used by the device will cause timing deviations in tb2 timings (as in the case where two
devices are sharing a common R1 resistor).
2. The oscillator stability with temperature is dependent on the temperature coefficients of the external components. If the
capacitance value of the external capacitor varies more than 5% over the parametric temperature range, the figures quoted
for oscillator variation are not valid.
3. The tb1 duration is given by coefficient 4 x R2 x C2 (tb1 duration = tb1 x 4 x R2 x C2).
4. The tb2 duration is given by coefficient x R3 x C2 (tb2 duration = tb2 x R3 x C2).
2



Html Pages

1 2 3 4 5 6 7


Datasheet Download

Go To PDF Page


Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com