3825 Ohio Avenue • St. Charles, IL 60174

Phone: 800-SENSOR2 • Fax: 630-377-6495

©2006 System Sensor.

Product specifications subject to change without notice. Visit systemsensor.com for

current product information, including the latest version of this data sheet.

A05-0197-009 • 11/06 • #1676

Electrical Connections for PIBV2

Ordering Information

Part No.

Description

PIBV2

Post Indicator/Butterfly valve supervisory switch

PIBV2A

Post Indicator/Butterfly valve supervisory switch (ULC model)

Accessories

A3010-00

Replacement hardware kit (wrenches, screw pack)

WFDW

Replacement tamper proof wrench for cover

546-7000

Cover tamper switch kit

HEXW

Replacement hex wrench

S07-66-XX

Tamper screws for cover

PIBV2 Specifications

Architectural/Engineering Specifications

Model shall be model number PIBV2 Post Indicator Butterfly Valve supervisory switch as manufactured by System Sensor. PIBV2 shall be installed on each valve

as designated on the drawings and/or as specified herein. Switches shall be mounted so as not to interfere with the normal operation of the valve and shall

be adjusted to operate within two revolutions of the valve control or when the valve flag has moved no more than one-fifth of the distance from its normal

position. The mechanism shall be contained in a weatherproof die cast metal housing, which shall provide a side entrance for ½˝ conduit and incorporate a ½˝

NPT nipple for attachment to the valve body. A grounding provision is provided. The switch assembly shall include two switches each with a rated capacity of

10 Amp @ 125/250V AC and 2.5 Amp @ 24V DC. The cover shall contain tamper-resistant screws for which a security wrench will be provided with each switch.

PIBV2 shall be Underwriters Laboratories listed for indoor or outdoor use. The PIBV2 shall be Factory Mutual, CSFM, and MEA approved.

Physical Specifications

Operating Specifications

Overall Switch

Dimensions

4¼˝H × 3½˝W × 3¼˝D

(10.8cm × 8.9cm × 8.2cm)

Contact Ratings

Two sets of SPDT (Form C)

10.0 A @ 125/250V AC; 2.5 @ 6/12/24V DC

Shipping Weight

2 lbs. (0.9 kg)

Enclosure Rating

UL indoor/outdoor

NEMA 3R when mounted with the actuator vertical

Operating Temperature

Range

–40°F to 120°F (–40°C to 49°C)

Cover Tamper Switch

Standard with ULC model

Optional for UL model, part no. 546-7000

Service Use

Automatic Sprinkler: NFPA 13

One or Two Family Dwelling: NFPA 13D

Residential Occupancies up to 4 stories: NFPA 13R

National Fire Alarm code: NFPA 72

Mounting

½˝ NPT nipple

Warranty

3 years

Conduit Entrances

One single side open for ½˝ conduit

U.S. Patent No.

5,213,205

Top View

Switch 1

CO

M

CO

M

AB

B

A

Switch 2

CONTACT RATINGS

125/250 VAC

24 VDC

10 AMPS

2.5 AMPS

Sup. Switch

BB

COM

COM

Sup. Switch

BB

COM

COM

Typical FACP Connection

to nonsilenceable initiating

zone of listed FACP

end-of-line resistor

B

COM

to power source

compatible

with bell

local

bell

Typical Local Bell Connection

Break wire as shown for supervision

of connection. DO NOT allow stripped

wire leads to extend beyond switch

housing. DO NOT loop wires.

Strip Gauge

PIBV2 Mounting

The following are examples of

acceptable mounting positions:

The following mounting position is not acceptable:

Actuator Vertical (Down)

Actuator Horizontal

Actuator Vertical

(Pointing Up)

Break

here

Actuating Arm Breakaway Feature: