D64BP Series

Pin-Out and Package Data

Ordering Information

We hope the information given here will be helpful. The information is based on data and our best knowledge, and we consider the information to be true and accurate. Please read all statements,

recommendations or suggestions herein in conjunction with our conditions of sale which apply to all goods supplied by us. We assume no responsibility for the use of these statements,

recommendations or suggestions, nor do we intend them as a recommendation for any use which would infringe any patent or copyright.

IN-D64BP-02

1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176

e-mail: sales@freqdev.com • Web Address: http://www.freqdev.com

3

Specification

(25°C and Vs ±15Vdc)

DC Offset Adjustment

± Vs

- Vs

20 k

Ω

(Cermet)

Do not connect

if trim is not

required.

OS

Impedance

10 k

Voltage Range

Max. Safe Voltage

Analog Output Characteristics

Impedance (Closed Loop)

10

Linear Operating Range

Maximum Current

2

Offset Voltage

3

20 mV max.

Offset Temp. Coeff.

50

µV/°C

Power Supply (

Rated Voltage

Operating Range

Maximum Safe Voltage

Quiescent Current

Temperature

Operating

Storage

-25 to +85°C

D64BP2/10-849 Hz

e.g.,

849 Hz

2.50 kHz

33.3 kHz

Ordering Information

“Q”

1, 2, 5, 10

Pin-Out & Package Data

Side View

0.80

0.025 dia.

All dimensions are in inches

All case dimensions

± 0.01"

Bottom View

+VS

OUT

-VS

IN

GND

0.80

0.70

0.10

0.00

OS

4

0.15 (min)

Front View

0.30

1.80

Notes:

1. Input and output signal voltage referenced to supply common.

2. Output is short circuit protected to common. DO NOT CONNECT TO ±Vs.

3. Adjustable to zero.

4. Units operate with or with out offset pin connected.

5. How to Specify Center Frequency:

Center frequencies are specified by attaching a three digit frequency

designator to the basic model number. Center frequencies can range from

1 Hz to 100 kHz.