MAX3243

3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER

SLLS350B – APRIL 1999 – REVISED JANUARY 2000

4

POST OFFICE BOX 655303

–0.3 V to 6 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Positive output supply voltage range, V+ (see Note 1)

–0.3 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Negative output supply voltage range, V– (see Note 1)

0.3 V to –7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Supply voltage difference, V+ – V– (see Note 1)

13 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–0.3 V to 6 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Receiver

–25 V to 25 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–13.2 V to 13.2 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Receiver (INVALID)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

62

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DW package

46

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PW package

62

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds

260

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltages are with respect to network GND.

2. The package thermal impedance is calculated in accordance with JESD 51.

recommended operating conditions (see Note 3 and Figure 6)

MIN

NOM

MAX

UNIT

Supply voltage

VCC = 3.3 V

3

3.3

3.6

V

Supply voltage

VCC = 5 V

4.5

5

5.5

V

VIH

Driver and control high level input voltage

DIN FORCEOFF FORCEON

VCC = 3.3 V

2

V

VIH

Driver and control high-level input voltage

DIN, FORCEOFF, FORCEON

VCC = 5 V

2.4

V

VIL

Driver and control low-level input voltage

DIN, FORCEOFF, FORCEON

0.8

V

VI

Driver and control input voltage

DIN, FORCEOFF, FORCEON

0

5.5

V

VI

Receiver input voltage

–25

25

V

TA

Operating free-air temperature

MAX3243C

0

70

°C

TA

O erating free-air tem erature

MAX3243I

–40

85

°C

NOTE 3: Test conditions are C1–C4 = 0.1

µF at VCC = 3.3 V ± 0.3 V; C1 = 0.047 µF, C2–C4 = 0.33 µF at VCC = 5 V ± 0.5 V.

electrical characteristics over recommended ranges of supply voltage and operating free-air

temperature (unless otherwise noted) (see Note 3 and Figure 6)

PARAMETER

TEST CONDITIONS

MIN

TYP‡

MAX

UNIT

II

Input leakage current

FORCEOFF, FORCEON

±0.01

±1

µA

Auto-powerdown disabled

No load,

FORCEOFF and FORCEON at VCC

0.3

1

mA

ICC

Supply current

Powered off

No load, FORCEOFF at GND

1

10

ICC

Su

ly current

Auto-powerdown enabled

No load, FORCEOFF at VCC,

FORCEON at GND,

All RIN are open or grounded

1

10

µA

‡ All typical values are at VCC = 3.3 V or VCC = 5 V, and TA = 25°C.

NOTE 3. Test conditions are C1–C4 = 0.1

µF at VCC = 3.3 V ± 0.3 V; C1 = 0.047 µF, C2–C4 = 0.33 µF at VCC = 5 V ± 0.5 V.