© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice

Fara108p

Page 1 of 3

Aug-05(C)

INPUT

Parallel multiplexed component signals to CCIR Rec 656

SMPTE RP-125 coded.

Note. To ease interfacing into equipment data is latched by the rising edge of the clock.

Data rate

27 MHz

Data Set up time

3 nS min to positive edge of clock

Data hold time

2.5 nS min from positive edge of clock

Line standard

625/50 or 525/60 Auto detection

Analogue Output Characteristics

Output format

YPbPr / RGB

Output levels

700 mV ±1%

Output Impedance

75 Ohms ±1%

Output return loss

> 40 dB to 5.5 MHz

Resolution

10 bit

Freq. Response

Luminance

< 0.2 dB to 5.5 MHz

Chrominance

< 0.2 dB to 2.2 MHz

K-ratings

kp, kpb, kbar <1%

Noise

>70 dB rms to 5.5 MHz

Power

+5V

±0.25V (300mA max)

Mechanical Details

The following formats are available:

Format A

STD configuration with low profile pins and BNC connectors for outputs.

Format B

LOW profile pins and MCX connectors for outputs.

Format C

STAND-OFF configuration with BNC outputs.

CONVERTER CARD PI-002

PARALLEL TO ANALOGUE YPBPR/RGB 10 BIT

LOW COST