NORTH AMERICA

TOLL FREE

FAX

Test & Measurement Regional Sales

LATIN AMERICA

TEL

FAX

ASIA PACIFIC

TEL

FAX

EMEA

TEL

FAX

www.jdsu.com/test

RPM2000 MODULE

Flexible Measurement Plans to

Adapt to User Preferences

Users have ultimate flexibility in

programming the RPM2000 for real-

time troubleshooting and monitoring.

Measurement parameters can be

varied for each individual port,

allowing the user to program each of

the eight ports on a single RPM2000

with different measurement plans. In

addition, within an individual port,

the measurement parameters can be

varied by frequency, allowing different

spans of the return spectrum to be

scanned with different resolutions or

certain spans of the return spectrum

to be skipped altogether.

Expands and Scales with No

Degradation in Performance

As part of the PathTrak Performance

Monitoring System, the RPM2000

monitoring modules are VME-based

cards that mount into a modular

HCU control chassis (HCU400 or

HCU1500). Thus, a monitoring

system can be designed to serve the

existing number of test points today

and can then be expanded easily by

adding additional RPM2000 modules.

Furthermore, because each RPM2000

module is an independent spectrum

analyzer receiver, adding modules to

accommodate more test points does

not adversely affect the overall system

speed or performance.

All statements, technical information and recommendations related to the products herein are based upon information believed to be

reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any

inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves

the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, includ-

ing withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products

herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are

trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2007 JDS Uniphase

Corporation. All rights reserved. 30137537 001 0707

PATHTRAKRPM2000.DS.CAB.TM.AE

Specifications

Frequency Range

5-65 MHz

Dynamic Range

-40 dBmV to 50 dBmV

Resolution Bandwidth

Programmable to 30, 300, 1000 kHz

Spur Free Dynamic Range

40 dB (TYP)

Operational Temperature Range & Accuracy

+/- 2 dB @ room temperature; +/- 3 dB drift, -50°C

Video Bandwidth

Programmable to 10, 30, 100, 300, 1000 kHz

Level Accuracy

+/- 2 dB on signal pulses >10 microseconds; +/- 4 dB on signal pulses >1 microsecond

Minimum Noise Burst Measurable

<1 microsecond

Dwell Time

Programmable from 1 microsecond to 100 milliseconds

Monitoring Mode

Maximum 250 points frequency resolution, scan rate depends on

measurement settings, typically 5 to 10 scans per second for every port

Interactive Spectrum Analyzer Mode

500 points frequency resolution, up to 6 full spectrum scans per second with a

20 µSec dwell time

Recommended Input Level of Active Signals

0 to +10 dBmV

Ordering Information

RPM Options

RPM2000F

1019-00-1532

Monitoring module with F connectors

RPM2000BNC

1019-00-1524

Monitoring module with BNC connectors

Chassis Options

HCU400

1010-00-0435

Holds up to 4 RPM2000 cards

HCU1500

1010-00-0433

Holds up to 15 RPM2000 cards

Close-up view of the rear of a HCU1500 showing RPM2000 modules.