Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085

6/12/07

Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com

1

www.purdyelectronics.com

AND124R

Standard Bright LED LAMPS

Precaution

Please be careful of the following:

1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device.

2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead

forming.

Characteristics

Symbol

Test Condition

Red

Unit

Min.

Typ.

Max.

Forward Voltage

–2.0

2.5

V

Reverse Current

–

–

10

µA

Peak Emission Wavelength

λp

–

700

–

nm

Spectral Line Half Width

λ

–45

–

nm

Weight: 0:30 g

Unit: mm

ø3.1

± 0.2

0.5

0.5

1. Anode

2. Cathode

2.54

2

1

ø3.8

± 0.2

AND124R

Standard LED

T-1 Package (3 mm)

Features

• Low power requirement

• Stand-off or flush-mount

• All plastic molded lens

• Color: GaP–Red

Part

Number

Color

Lens

Desc.

Axial Luminous

Intensity (mcd)

Test

Condition

Viewing

Angle

2

θ1/2

(deg)

LED

Lens

Min.

Typ.

AND124R

Red

Red

Diffused

1.3

3.0

10

60

Characteristics

Symbol

Rating

Unit

Forward Current (DC)

25

mA

Reverse Voltage

5V

Power Dissipation

120

mW

Operating Temperature

-40 to +85

°C

Storage Temperature Range

-40 to +85

°C

Product specifications contained herein may be changed without prior notice.

It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.

• RoHS Compliant