SN75150P datasheet(3/7 Pages) TI

3 / 7 page

SN75150

DUAL LINE DRIVER

SLLS081C – JANUARY 1971 – REVISED JUNE 1999

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†

Supply voltage, VCC+ (see Note 1)

15 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Supply voltage, VCC–

– 15 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage, VI

15 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Applied output voltage

±25 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

θJA (see Notes 2 and 3): D package

197

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . .

P package

104

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds

260

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range, Tstg

–65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. Voltage values are with respect to network ground terminal.

2. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable

ambient temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can impact reliability.

3. The package thermal impedance is calculated in accordance with JESD 51, except for through-hole packages, which use a trace

length of zero.

recommended operating conditions

MIN

NOM

MAX

UNIT

Supply voltage

VCC+

10.8

13.2

Supply voltage

VCC–

– 10.8

–12

– 13.2

High-level input voltage, VIH

5.5

Low-level input voltage, VIL

0.8

Driver output voltage, VO

±15

Operating free-air temperature, TA

°C

SN75150P Datasheet(PDF) 3 Page - Texas Instruments

SN75150P Datasheet(HTML) 3 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7

Datasheet Download

Link URL