USA:

Sales: 800-490-2361

Fax: 425-446-5844

Europe: 31-(0) 40 2675 150 International: 425-446-5500

All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),

.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.

Specifications are subject to change without notice. Registered trademarks are

the property of their respective companies.

Copyright © 2008

D2015568 Rev. 002

Page 1 of 1

Model 6497

Modular Passive Oscilloscope Probe w/RO

Model 6497

Modular Passive Oscilloscope Probe with Readout

Actuator

Accessories included with Probe:

Features

•

This probe is recommended for general purpose

probing applications and is adjustable for low and

high frequencies.

•

The probe's entire core is made of a high quality

ceramic hybrid.

•

Pure coaxial design and laser trimmed resistors

ensure highest signal fidelity along the signal path

offering high bandwidth and fast risetimes for

accurate impulse measurements.

•

Probe tips are interchangeable and can be replaced

easily.

•

Accessories (one of each) included with Probe are:

BNC Adapter

Ground Blade

Ground Lead with Alligator Clip 22 cm (8.66”)

Ground Spring

IC Caps: 0.8mm, 1.0mm, and 1.27mm pitch

Insulating Cap

Protection Cap

Solid Tip 0.8mm (0.0315”)

Spring Tip 0.8mm (0.0315”)

Sprung Hook

Trimmer Tool

2 Footer Positioner

Copper (Cu) Pads

•

Our passive probes are spring loaded, with needle

sharp tips to support precise and safe

measurements.

•

The Readout BNC connector enables automatic

recognition by scopes that feature a sense ring to

detect probe attenuation.

Specifications

Attenuation Ratio

10:1

Maximum Input Voltage CAT II¹

300 Vrms

Scope Bandwidth MHz

350

System Bandwidth MHz (-3 dB)

350

System Risetime (ns)

< 1

Probe Input Resistance (MΩ)

10

Probe Input Capacitance (pF)

< 14.5

Compensation Range (pF)

10 – 35

Readout Actuator²

Yes

Cable Length

4 ft. (1.2 m)

1

Rating: Per IEC 61010-031. Maximum voltage allowed on the low or ground

connection including shell and housing must not exceed 30 V.

2 Any oscilloscope that uses the Tektronix® style range actuator.

Ordering Information

Model: 6497