Your dependable power partner – www.powerbox.com.au

481

Specifications

INPUT

Input voltage

90-132 / 180-264VAC,auto-ranging, 2 Wires +

ground

Frequency

47-63Hz

Current

11A max. at 115VAC, 6A max. at 230VAC

OUTPUT

Voltage adjustment

Zero to rated output

Current adjustment

Zero to rated output

Ripple & Noise

See table

Line regulation

Voltage: 0.005% of Vmax + 2mV

Current: 0.01% of Imax + 2mA

Load regulation

Voltage: 0.005% of Vmax + 2mV

Current: 0.02% of Imax + 5mA

Transient response

500 s to steady-state output voltage

(within 0.1% of Vmax) for 50-100% or 100-50%

load change

Stability

+/-0.05% of maximum voltage or current over 8

hours after 30 minute warm-up time at fixed line,

load and temperature

Temperature coefficient

0.02%/°C of maximum output voltage

0.03%/°C of maximum output current

ENVIRONMENTAL

Operating temperature

0°C to 50°

Storage temperature

-40°C to 65°C

Cooling

Internal variable speed fan with over-temperature

protection.

DLM 600 Series

600 W A TTS PROGRAMMABLE DC SUPPL Y

OPERATING

Efficiency

84% typical at maximum power

82% typical for DLM 5-7 and DLM 8-75

Parallel/Series operation

Up to 4 unit of the same model can be connected

in parallel, with active current sharing control.

Series operation, multiple units of same model can

be connected in series, limited by 300Vpk between

either output terminal and chassis

Remote sense

The maximum allowed load line drop with remote

sensing is 1V total for DLM 5-75 & DLM 8-75

model, 2V total for all other model

Remote programming

Voltage , current (0-100%) and OVP (5-110%) of

full scale can be programmed by selectable

0-5VDC, 0-10VDC, or 0-5K

Ω

Remote monitoring

Voltage or current can be Monitored with user-

selectable ranges, scaled to 0-5VDC or 0-10VDC

Displays and indicators

Two 3.5 digital LED displays indicate voltage,

current and, over-voltage output set point, fault,

external off, remote and output on

Software

LabVIEW® driver for M9G/M85

(Contact Powerbox)

Regulatory compliance

CE mark, UL listing mark and

C-UL listing mark

MECHANICAL

Case

Enclosed

Dimensions

1RU 44(H) x 216 (W) x 432mm(D)

Weight

4.4Kg

Connectors

Input: IEC320

Output: Bus bar with 10-32 screws for 5-60VDC

models; terminal blocks with 6-32 screws for

80-300V models

Features

•

High power density

•

High efficiency

•

Remote voltage sense & remote operation

•

Master/slave paralleling, active current sharing

•

Low output noise

•

CE mark, UL listing mark and C-UL listing mark

•

Ethernet/LAN Interface Option