96

Snap Action Switch

SS

Model Number Legend

Specifications

■ Characteristics

Note: 1. Data shown are of initial value.

2. The dielectric strength values shown is measured using a separator between the switch and metal mounting plate.

3. For pin plunger models, the above value apply for use at the free position and total travel position. For the lever models, the values apply

at the total travel position.

Operating speed

0.1 mm to 1 m/second (pin plunger models)

Operating frequency

Mechanical: 400 operations per minute max.

Electrical: 30 operations per minute max.

Insulation resistance

100 M

Ω at 500 VDC

Contact resistance

150 gf:

SS-10, SS-5 models:

30 m

Ω max.

SS-01 models:

50 m

Ω max.

50 gf:

SS-5 models:

50 m

Ω max.

SS-01 models

100 m

Ω max.

25 gf:

SS-01 models

150 m

Ω max.

Dielectric strength (See note 2)

1,000 VAC (600 VAC for SS-01), 50/60 Hz for 1 minute between terminals of same polarity

1,500 VAC, 50/60 Hz for 1 minute between current-carrying metal parts and ground and between each

terminal and noncurrent-carrying metal parts

Vibration resistance (see note 3)

Malfunction: 10 to 55 Hz, 1.5 mm double amplitude

Shock resistance (see note 3)

150 gf:

50 gf and 25gf:

Degree of protection

IEC IP40

Degree of protection against

electric shock

Class I

Proof tracking index (PTI)

175

Ambient operating temperature

-25

° to 85°C (at 60% RH max.) with no icing

Ambient operating humidity

85% max. (for 5

°C to 35°C)

Service life

Mechanical:

30 million operations min. at 60 operations per minute (SS-01, SS-5)

10 million operations min. at 60 operations per minute (SS-10)

Electrical:

200,000 operations min. at 30 operations per minute (SS-01, SS-5)

50,000 operations min. at 30 operations per minute (SS-10)

Weight

Approx. 1.6 g pin plunger type

SS-

1.

Ratings

10:

10.1 A at 125 VAC

5:

5 A at 125 VAC

01:

0.1 A at 30 VDC

3.

None: 150 gf

-F:

50 gf (0.1A and 5A versions)

-E:

25 gf (0.1A versions)

4.

Contact Form

None: SPDT

-2:

SPST-NC

-3:

SPST-NO

Note: These OF values are for the pin plunger models.

2.

Actuator

None: Pin plunger

GL:

Hinge lever

GL13: Simulated roller lever

GL2:

Hinge roller lever

5.

Terminals

None: Solder terminals

T:

Quick-connect terminals (#110)

D:

Straight PCB terminals

D1:

Left-angled PCB terminals

D2:

Right-angled PCB terminals

3 4 5

2

1

Consult Omron regarding the following:

- SPST-NC and SPST-NO versions

- High temperature versions that are rated from -25

°C to 120°C

- Left and Right angled PCB terminal versions