| Electronic Components Datasheet Search |
|
LPC2114 Datasheet(PDF) 18 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
LPC2114 Datasheet(HTML) 18 Page - NXP Semiconductors |
|
18 / 40 page ![]() LPC2114_2124_6 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 06 — 10 December 2007 18 of 40 NXP Semiconductors LPC2114/2124 Single-chip 16/32-bit microcontrollers 6.13.2 Features available in LPC2114/2124/01 only • Timer can count cycles of either the peripheral clock (PCLK) or an externally supplied clock. • When counting cycles of an externally supplied clock only one of timer’s capture inputs can be selected as the timer’s clock. The rate of such a clock is limited to PCLK / 4. Duration of HIGH/LOW levels on the selected CAP input can not be shorter than 1 / (2PCLK). 6.14 Watchdog timer The purpose of the watchdog is to reset the microcontroller within a reasonable amount of time if it enters an erroneous state. When enabled, the watchdog will generate a system reset if the user program fails to ‘feed’ (or reload) the watchdog within a predetermined amount of time. 6.14.1 Features • Internally resets chip if not periodically reloaded. • Debug mode. • Enabled by software but requires a hardware reset or a watchdog reset/interrupt to be disabled. • Incorrect/incomplete feed sequence causes reset/interrupt if enabled. • Flag to indicate watchdog reset. • Programmable 32-bit timer with internal pre-scaler. • Selectable time period from (Tcy(PCLK) × 256 × 4) to (Tcy(PCLK) × 232 × 4) in multiples of Tcy(PCLK) × 4. 6.15 Real-time clock The RTC is designed to provide a set of counters to measure time when normal or idle operating mode is selected. The RTC has been designed to use little power, making it suitable for battery powered systems where the CPU is not running continuously (Idle mode). 6.15.1 Features • Measures the passage of time to maintain a calendar and clock. • Ultra low power design to support battery powered systems. • Provides Seconds, Minutes, Hours, Day of Month, Month, Year, Day of Week, and Day of Year. • Programmable reference clock divider allows adjustment of the RTC to match various crystal frequencies. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |