MPR083 datasheet(30/56 Pages) FREESCALE

Part #	MPR083

Description	Blood Pressure Monitor Using the Flexis QE128 Family

PDF	56 Pages

Scroll/Zoom	100%

Manufacturer	FREESCALE [Freescale Semiconductor, Inc]

Direct Link	http://www.freescale.com

Logo

30 / 56 page

Hardware Description

Blood Pressure Monitor Design Reference Manual, Rev. 0

3-8

Freescale Semiconductor

Figure 3-4. Bottom Placement and Labeling

3.10.1.4

Labeling

All parts are outlined in the board, as well as the different supply and GND signals. Two LEDs indicate

the power status of the 3.3 V supply (digital, analog, and RF sections) and the 12 V supply (for the OLED

and the audio amplifier).

The figures in this chapter and Table 3-1 show the labeling of the supplies and the signals to which they

correspond:

Table 3-1. Signals

Name

Signal

3.3 V

General 3.3 V supply for the digital, RF, and analog blocks

3.3 V_D

Supply for the digital block (Flexis and JM60 MCUs)

3.3 V_Z

Supply for the RF block

3.3 V_A

3.3 V supply for the analog blocks (instrumentation amplifier and MPR083 device)

GND_D

Digital ground

GND_Z

RF ground

GND_A

Analog ground

GND_M

Motor block ground

MPR083 Datasheet(PDF) 30 Page - Freescale Semiconductor, Inc