ADP3418

Rev. 6 | Page 4 of 13 | www.onsemi.com

ABSOLUTE MAXIMUM RATINGS

Table 2.

Parameter

Rating

VCC

−0.3 V to +15 V

BST

DC

<200 ns

−0.3 V to +36 V

BST to SW

−0.3 V to +15 V

SW

DC

−5 V to +15 V

<200 ns

−10 V to +25 V

DRVH (DC)

SW − 0.3 V to BST + 0.3 V

DRVH (<200 ns)

SW − 2 V to BST + 0.3 V

DRVL (DC)

DRVL (<200 ns)

IN, OD

−0.3 V to +6.5 V

Operating Ambient

Temperature Range

0°C to 85°C

Operating Junction

Temperature Range

0°C to 150°C

Storage Temperature Range

−65°C to +150°C

2-Layer Board

123°C/W

4-Layer Board

90°C/W

Lead Temperature (Soldering, 10 sec)

300°C

Infrared (15 sec)

260°C

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

Absolute maximum ratings apply individually only, not in

combination. Unless otherwise specified, all voltages are

referenced to PGND.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.