1.

General description

The 74ALVT16601 is a high-performance Bipolar Complementary Metal Oxide

compatibility up to 5 V. This device is an 18-bit universal transceiver featuring

non-inverting 3-state bus compatible outputs in both send and receive directions. Data

flow in each direction is controlled by output enable (OEAB and OEBA), latch enable

(LEAB and LEBA), and clock (CPAB and CPBA) inputs. For A-to-B data flow, the device

operates in the transparent mode when LEAB is HIGH. When LEAB is LOW, the A-bus

data is latched if CPAB is held at a HIGH or LOW level. If LEAB is LOW, the A-bus data is

stored in the latch/flip-flop on the LOW-to-HIGH transition of CPAB. When OEAB is LOW,

the outputs are active. When OEAB is HIGH, the outputs are in the high-impedance state.

The clocks can be controlled with the clock enable inputs (CEAB and CEBA).

Data flow for B-to-A is similar to that of A-to-B but uses OEBA, LEBA and CPBA.

Active bus hold circuitry is provided to hold unused or floating data inputs at a valid logic

level.

2.

Features

−32 mA

inputs

74ALVT16601

18-bit universal bus transceiver; 3-state

Rev. 03 — 5 July 2005

Product data sheet