SC624 datasheet(14/22 Pages) SEMTECH

Part #	SC624

Description	LED Light Management Unit Charge Pump, 4 LEDs, Dual LDOs,and SemWireTM Interface

PDF	22 Pages

Scroll/Zoom	100%

Manufacturer	SEMTECH [Semtech Corporation]

Direct Link	http://www.semtech.com

Logo

14 / 22 page

SC624

Charge Pump Output Current Limit

The device also limits the charge pump current at the

VOUT pin (typically 300mA).

LDO Current Limit

The device limits the output currents of LDO1 and LDO2

to help prevent it from overheating and to protect the

loads. The minimum limit is 200mA, so load current

greater than the rated 100mA can be used with degraded

accuracy and larger dropout without tripping the current

limit.

Applications Information (continued)

LED Float Detection

Float detect is a fault detection feature of the LED current

sink outputs. If an output is programmed to be enabled

and an open circuit fault occurs at any current sink output,

that output will be disabled to prevent a sustained output

OVP condition from occurring due to the resulting open

loop. Float detect ensures device protection but does

not ensure optimum performance. Unused LED outputs

must be disabled to prevent an open circuit fault from

occurring.

SC624 Datasheet(PDF) 14 Page - Semtech Corporation