| Electronic Components Datasheet Search |
|
SC657 Datasheet(PDF) 20 Page - Semtech Corporation |
|
|
|||||||||||||||||||||||||||||
SC657 Datasheet(HTML) 20 Page - Semtech Corporation |
|
20 / 22 page ![]() 20 Register and Bit Definitions (continued) SC657 Main Fade Control (04h) This register sets the fade status and rate for the main backlight group. Bits [D5:D2] These bits are unused and are always zeros, so the maximum pulse count for this register is 3. MFADE1, MFADE0[D1:D0] These bits are used to enable and set the rise/fall rate between two backlight currents as follows in Table 7. Table 7 — Main Display Fade Control Bits MFADE1 MFADE0 Fade Feature Rise�Fall Rate (ms�step) 0 0 OFF 0 8 0 6 32 The number of steps used to change the backlight current will be equal to the change in binary count of bits MBL[4:0]. When a new backlight current is set, the backlight current will change from its current value to a new value set by bits MBL[4:0] at the rate determined by MFADE and MFADE0 bits. The total fade time is determined by the number of steps between old and new backlight values, in Table 4, multiplied by the rate of fade in ms/step. Backlight Grouping Configuration (05h) This register assigns the LEDs to the back light bank configurations. Bits [D5:D3] These bits are unused and are always zeros, so the maximum pulse count for this register is 7. MB2, MB1 and MB0 [D2:D0] These bits are used to set the number of LED drivers dedi- cated to each backlight group. This allows the device to drive up to three different sets of LEDs with different current settings. Note that any driver assigned to any LED group can still be disabled independently if not needed. The code set by these bits determines how the LED drivers are assigned among the three LED groups according to the assignments listed in Table 8. Default state for each of these three bits is “0” (all LEDs assigned to main display). Table 8 — Backlight Grouping Configuration MB2 MB1 MB0 Main Display LED Drivers Sub Display LED Drivers Third Display LED Drivers 0 0 0 BL-BL5 0 0 BL-BL3 BL4-BL5 0 0 BL-BL2 BL3-BL4 BL5 0 BL-BL2, BL5 BL3 BL4 0 0 BL-BL3 BL4-BL5 0 BL-BL4 BL5 X BL-BL5 |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |