SUPERWORLD ELECTRONICS (S) PTE LTD

SMD POWER INDUCTORS

PDB1608 SERIES

NOTE : Specifications subject to change without notice. Please check our website for latest information.

PG. 5

11.05.2010

a) Products should be handled with care to avoid damage or contamination from perspiration and skin oils.

1. Storage Conditions :

2. Transportation :

c) Bulk handling should ensure that abrasion and mechanical shock are minimized.

b) The use of tweezers or vacuum pick up is strongly recommended for individual components.

c) The packaging material should be kept where no chlorine or sulfur exists in the air.

b) Recommended products should be used within 6 months from the time of delivery.

a) Temperature and humidity conditions : Less than 40°C and 70% RH.

To maintain the solderabililty of terminal electrodes :

Application Notice

Base tape

in the arrow direction under the following conditions.

The force for tearing off cover tape is 5 to 120 grams

860~1060

Room atm

(hPa)

(4) Tearing Off Force

Top cover tape

F

165° to 180°

(°C)

5~35

Room Temp.

(%)

45~85

Room Humidity

(mm/min)

300

Tearing Speed