SI9986 datasheet(2/6 Pages) VISHAY

2 / 6 page

www.vishay.com

Document Number: 70007

S-72211-Rev. F, 22-Oct-07

Vishay Siliconix

Si9986

Notes:

a. Device Mounted with all leads soldered or welded to PC board.

b. Derate 10 mW/°C above 25 °C.

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation

of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum

rating conditions for extended periods may affect device reliability.

Notes:

a. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.

b. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.

ABSOLUTE MAXIMUM RATINGSa

Parameter

Limit

Unit

Voltage on any Pin with Respect to Ground

- 0.3 to VDD + 0.3

Voltage on Pins 5, 8 with Respect to GND

- 1 to VDD + 1

Voltage on Pins 1, 4

- 0.3 to GND + 1

Peak Output Current

1.5

Storage Temperature

- 65 to 150

°C

Maximum Junction Temperature (TJ)

150

Maximum VDD

Power Dissipationb

100

°C/W

Operating Temperature Range

Si9986CY

0 to 70

°C

Si9986DY

- 45 to 85

RECOMMENDED OPERATING RANGE

Parameter

Limit

Unit

VDD

3.8 to 13.2

Maximum Junction Temperature (TJ)

125

°C

SPECIFICATIONS

Parameter

Symbol

Test Conditions

Unless Otherwise Specified

VDD = 3.8 to 13.2 V

SA at GND, SB at GND

Limits

C Suffix, 0 to 70 °C

D Suffix, - 40 to 85 °C

Unit

Mina

Typb

Maxa

Input

Input Voltage High

VINH

Input Voltage Low

VINL

Input Current with Input Voltage High

IINH

VIN = 2 V

µA

Input Current with Input Voltage Low

IINL

VIN = 0 V

- 1

Output

Output Voltage High

VOUTH

IOUT = - 500 mA

VDD = 10.8 V

10.5

10.7

VDD = 4.5 V

4.1

4.3

IOUT = - 300 mA, VDD = 3.8 V

3.4

3.7

Output Voltage Low

VOUTL

IOUT = 500 mA

VDD = 10.8 V

0.2

0.3

VDD = 4.5 V

0.2

0.4

IOUT = 300 mA, VDD = 3.8 V

0.1

0.4

Output Leakage Current High

IOLH

INA = INB ≥ 2 V, VOUT = VDD = 13.2 V

- 10

µA

Output Leakage Current Low

IOLL

VOUT = 0, VDD = 13.2 V

Output V Clamp High

VCLH

INA = INB ≥ 2 V

IOUT = 100 mA

VDD + 0.7

Output V Clamp Low

VCLL

IOUT = - 100 mA

- 0.7

Supply

VDD Supply Current

IDD

IN = 100 kHz, VDD = 5 V

INA = INB = 4.5 V, VDD = 5.5 V

300

µA

Dynamic

Propogation Delay Time

TPLH

VDD = 5 V

300

TPHL

100

SI9986 Datasheet(PDF) 2 Page - Vishay Siliconix

SI9986 Datasheet(HTML) 2 Page - Vishay Siliconix

Html Pages

1 2 3 4 5 6

Datasheet Download

Link URL