LSM330DL datasheet(49/54 Pages) STMICROELECTRONICS

Part #	LSM330DL

Description	Linear sensor module 3D accelerometer sensor and 3D gyroscope sensor

PDF	54 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

49 / 54 page

LSM330DL

Registers description

Doc ID 022018 Rev 1

49/54

7.45

INT1_DURATION_G (38h)

The D6 - D0 bits set the minimum duration of the interrupt event to be recognized. The

duration of the steps and maximum values depend on the ODR chosen.

The WAIT bit has the following meaning:

Wait =’0’: the interrupt falls immediately if the signal crosses the selected threshold

Wait =’1’: if the signal crosses the selected threshold, the interrupt falls only after the

duration has counted the number of samples at the selected data rate, written into the

duration counter register.

Figure 13.

Wait disabled

Table 106.

INT1_DURATION_G register

WAIT

Table 107.

INT1_DURATION_G description

WAIT

WAIT enable. Default value: 0 (0: disable; 1: enable)

D6 - D0

Duration value. Default value: 000 0000

LSM330DL Datasheet(PDF) 49 Page - STMicroelectronics