AFS090 datasheet(34/334 Pages) MICROSEMI

34 / 334 page

Device Architecture

2- 18

R e visio n 2

Table 2-7 • AFS250 Global Resource Timing

Commercial Temperature Range Conditions: TJ = 70°C, Worst-Case VCC = 1.425 V

Parameter

Description

–2

–1

Std.

Units

Min.1

Max.2

Min.1

Max.2

Min.1

Max.2

tRCKL

Input Low Delay for Global Clock

0.89

1.12

1.02

1.27

1.20

1.50

tRCKH

Input High Delay for Global Clock

0.88

1.14

1.00

1.30

1.17

1.53

tRCKMPWH

Minimum Pulse Width High for Global Clock

tRCKMPWL

Minimum Pulse Width Low for Global Clock

tRCKSW

Maximum Skew for Global Clock

0.26

0.30

0.35

FRMAX

Maximum Frequency for Global Clock

MHz

Notes:

1. Value reflects minimum load. The delay is measured from the CCC output to the clock pin of a sequential element

located in a lightly loaded row (single element is connected to the global net).

2. Value reflects maximum load. The delay is measured on the clock pin of the farthest sequential element located in a fully

loaded row (all available flip-flops are connected to the global net in the row).

3. For the derating values at specific junction temperature and voltage supply levels, refer to Table 3-7 on page 3-9.

Table 2-8 • AFS090 Global Resource Timing

Commercial Temperature Range Conditions: TJ = 70°C, Worst-Case VCC = 1.425 V

Parameter

Description

–2

–1

Std.

Units

Min.1

Max.2

Min.1

Max.2

Min.1

Max.2

tRCKL

Input Low Delay for Global Clock

0.84

1.07

0.96

1.21

1.13

1.43

tRCKH

Input High Delay for Global Clock

0.83

1.10

0.95

1.25

1.12

1.47

tRCKMPWH

Minimum Pulse Width High for Global Clock

tRCKMPWL

Minimum Pulse Width Low for Global Clock

tRCKSW

Maximum Skew for Global Clock

0.27

0.30

0.36

FRMAX

Maximum Frequency for Global Clock

MHz

Notes:

1. Value reflects minimum load. The delay is measured from the CCC output to the clock pin of a sequential element

located in a lightly loaded row (single element is connected to the global net).

2. Value reflects maximum load. The delay is measured on the clock pin of the farthest sequential element located in a fully

loaded row (all available flip-flops are connected to the global net in the row).

3. For the derating values at specific junction temperature and voltage supply levels, refer to Table 3-7 on page 3-9.

AFS090 Datasheet(PDF) 34 Page - Microsemi Corporation

AFS090 Datasheet(HTML) 34 Page - Microsemi Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL